Custom DTF heat transfers — No minimums · Fast turnaround
DTF Heat Transfers
Vibrant, full-colour direct-to-film transfers that press onto cotton, polyester and blends. Soft feel, sharp detail, built to last.
Ready in 24–48 hrs
No MinimumsPantone Match
80+ Wash Tested
No Tiered Pricing
Ready in 24–48 Hours
Next Day Delivery
Wholesale pricing available
Trusted by
Our Work
How It Works
1
Upload Your Art
Send your design in any size or colour.
2
We Print
Pantone-matched printing, ready in 24–48 hours.
3
Press & Wear
Heat press onto your garments — next day delivery available.
DTF Heat Transfer Instruction
Step 1 - Setup Heat Press
- Set your heat press to the right temperature for your substrate and DTF film (exact temperatures in the next step).
- Check that the substrate is clean and free of debris or creases.
- Place the DTF transfer on the substrate, printed side facing down.
- Use a cover sheet to shield the transfer and heat press plates from direct contact; this keeps the ink from clinging to the press and gives even heat.
Step 2 - Time to Press
- For cotton and cotton/poly blends, press at 285-290°F.
- For 100% polyester or other synthetics, press at 265-270°F.
- Once the transfer is aligned, gently close the heat press so it doesn't shift.
- Press for 12 seconds directly on the transfer at high pressure.
Step 3 - Peel & Press Again
- Peel off the transfer paper while it is still warm, or 5 seconds after pressing.
- Press again for another 5 seconds with a thin piece of cloth or craft paper on top of the print.
Step 4 - What not to do
- Do not wash the garment for 24 hrs after the heat press.
- Do not use fabric softener.
Settings are general guidelines — final values to be confirmed by Reflex 2000.